HPSC Assistant Director Syllabus 2026 - review Assessment pattern PDF

HPSC Assistant Director Syllabus and Exam Pattern 2026 - Overview

HPSC Assistant Director Selection Process 2026

According to the authorized announcement, selection for the post of Assistant Director Industrial Safety as well as Health is a two-stage process:

Subject Knowledge Test: A written, subjective-type test of 3 hours duration carrying 150 marks. The question paper will be set in English.

It is informed that, Screening for Interview: Only applicants who secure a minimum of 35% marks in the Subject Knowledge Test are called for the interview/viva-voce.

Number of test-takers Called for Interview: The Commission will call test-takers for interview up to 3 times the number of advertised posts, including bracketed test-takers ( applicants tied at the cut-off), provided they have secured the minimum qualifying cut-off of 35%.

Interview/Viva-Voce: Shortlisted test-takers appear for the interview stage.

Final Merit List: The final merit list is prepared by adding the marks of the Subject Knowledge Test as well as the Interview, weighted at 87.5% along with 12.5% respectively.

furthermore Read: HPCL Junior Executive Examination permit 2026

⚡ Get Custom Govt Job Alerts by Your Qualification (10TH | 12TH | Diploma | ITI | Graduate, Etc)

HPSC Assistant Director Exam Pattern 2026

Subject Knowledge Test Pattern

Qualifying criteria: A candidate must secure a minimum of 35% marks in the Subject Knowledge Test to be eligible for the interview. Category-wise (UR/EWS/OBC/SC/ST) qualifying percentages are not specified in the government circular.

HPSC Assistant Director Syllabus 2026

The official notification states that, The syllabus for the Subject Knowledge Test, as enclosed with the authorized announcement, is divided into nine broad sections covering skill development, academic management, engineering fundamentals, in addition to core technical subjects. Each section is detailed below exactly as notified.

1. National and International Scenario of Skill Development

Vocational Education System in India

Current National Policy on Skill Development in India

It is informed that, Objective as well as Need for Skill Development in India

Recommendations of various Committees on Vocational Education

Scope of Skill Development

2. Academic and Administrative Management

Organisation structure of Government ITIs

Reporting systems, reporting authorities, in addition to General Administration

Aspirants are advised that, SWOT analysis, vision along with mission, goals, strategic planning, internal/external environment management, resource mobilization, library management, maintenance of academic facilities

Problem-solving techniques, personal management, value analysis, faculty norms

3. Skill Development Schemes

Various Skill Development Schemes run by Central in addition to State Government, including the Craftsmen Training Scheme

As per the official update, Pradhan Mantri Kaushal Vikas Yojana (PMKVY), National Skill Qualification Framework (NSQF), State Skilling Schemes

Crafts Instructor Training Schemes (CITS)

The conducting body has announced that, National Apprentice Promotion Schemes (NAPS)

SANKALP Scheme, STRIVE Scheme

4. Engineering Mechanics and Engineering Drawing

Aspirants are advised that, Force as well as system of forces, equilibrium of rigid bodies, free body diagram, Lami's theorem, laws of Coulomb friction, equilibrium of bodies involving dry friction, belt friction, centre of gravity as well as moment of inertia

Aspirants are advised that, Stress in addition to strain: concept of stress as well as strain, simple stresses (tensile, compressive, shear), bending along with torsion, stress-strain curves, elastic constants

It is informed that, Engineering Graphics/Technical Drawing: drawing equipment as well as use of instruments, conventions in drawing practice, dimensioning, scales

Theory of projection of planes in addition to solids, orthographic projection

5. Fundamentals of Thermal Science

Introduction to thermodynamics, properties, forms of energy, thermodynamic systems, steady flow systems

Types of work, thermodynamic processes, laws of thermodynamics, Carnot theorem

Concept of enthalpy along with entropy

Introduction to I.C. Engines: two-stroke along with four-stroke S.I. as well as C.I. engines, Otto cycle, Diesel cycle

Aspirants are advised that, Basic idea of Refrigeration as well as Air Conditioning cycle

6. Basic Knowledge on Workshop Science

Measuring instruments in addition to gauges, introduction to manufacturing processes, basic terminology used, material properties along with their application, different engineering materials, properties, nomenclature, basics of heat treatment

Fitting: introduction, tools used in fitting, measuring along with marking, sawing, filing, tapping in addition to die, introduction to drills

Welding: brief introduction, electric arc, gas welding process in addition to equipment, soldering as well as brazing process, types of sheets (ferrous/non-ferrous), standard sheet sizes in addition to their measurement, tools used in sheet metal

Metal Cutting: introduction, classification of machine tools as well as cutting tools, basic operations on lathe, drilling, shaper, milling, cutting tool material, work-holding devices, cutting parameters (speed, feed, in addition to depth of cut)

Casting: pattern types, moulding sand as well as its properties, casting process in addition to defects

7. Basic Electrical Science

Network Laws along with Theorems: network laws for D.C. networks – Kirchhoff's laws, network elements, Superposition theorem, Thevenin's in addition to Norton's theorems, Maximum Power Transfer theorem

Single Phase A.C. circuits (general relations) series in addition to parallel circuits, analysis of simple RLC-series circuits, resonance, Q factor, Three Phase A.C. Circuits: single-phase EMF generation, form factor, peak factor, RMS value, average value, phasor diagram, resistive, inductive in addition to capacitive circuits, A.C.

Magnetic Circuits as well as Transformers: analogy between electric along with magnetic circuits, magnetic circuits, B-H curve, hysteresis loop, inductances in series along with parallel, hysteresis as well as eddy current losses

The department has confirmed that, Transformers – constructional details, EMF equation, rating along with phasor diagram on no-load as well as loaded conditions

Electrical Machines: three-phase induction motors – construction, principle of working as well as their applications; Electrical Instruments: basic principles of moving iron, PMMC, dynamometer in addition to induction type instruments, torque equation, dynamometer type wattmeter

8. Basic Electronics & Communication Science

Electronics instruments: role along with importance of general-purpose test instruments, CRO, CRT, semiconductor diodes as well as applications, review of PN junction diode, V-I characteristics, ideal diodes, LED, tunnel diode, photodiode

According to the latest notice, Halfwave, fullwave as well as bridge rectifiers, passive filters, regulators, line regulation along with load regulation, Zener diode as voltage regulator, concept of switched mode power supply (SMPS), Bipolar Junction Transistor, FET, MOSFET

The conducting body has announced that, Operational Amplifiers, applications of op-amp as summing amplifier, differentiator as well as integrator; Digital Electronics: number system as well as logic gates, NAND as well as NOR as universal gates, SR along with JK flip-flops

Introduction to Computers: generation of computers, characteristics in addition to classifications of computers, components of computers, types of memory, computer software along with their types, operating system, algorithm along with flow chart

Computer Networks & Communication: LAN, MAN, WAN, network topologies, modes of data communication, introduction to internet as well as its safeguard, router, switches, hub, bridges

9. Civil

Surveying instruments along with their uses, various civil engineering surveys, building by-laws, properties in addition to tests on construction materials like bricks, cement, coarse aggregate, steel reinforcement

Candidates should note that, Units of different fluid properties, type of fluid along with types of flow, flow measurement

Construction management techniques like bar chart, milestone, network CPM/PERT, construction equipment, notice inviting tender, administrative approval, technical sanction, specification

Tests on water along with waste water, Environment Protection Act, sources of air pollution, National Clean Air Programme

Types of dams in addition to canals, rainfall measurement, safe bearing capacity of soil, methods of building estimates, forms used in public works department

furthermore Read: Mizoram PSC LDE Assessment date 2026

How to Prepare for the HPSC Assistant Director Exam 2026

According to the latest notice, Start with the authorized syllabus: Since the paper is subjective in addition to covers nine distinct sections, list out every topic from the syllabus above as well as track your preparation against it rather than relying on generic engineering revision material.

Prioritize the technical core subjects: Engineering Mechanics, Thermal Science, Workshop Science, Electrical Science, Electronics & Communication, as well as Civil form the bulk of the syllabus – allocate more study time to these compared to the administrative as well as policy-based sections.

Don't skip the skill-development in addition to administration sections: Topics like PMKVY, NSQF, CITS, NAPS, SANKALP, as well as STRIVE, along with ITI academic as well as administrative management, are distinct sections in the syllabus as well as should be prepared separately using current government scheme documents.

Practice subjective, descriptive writing: Since the Subject Knowledge Test is subjective in nature, practice writing structured, point-wise answers within a 3-hour time frame rather than only solving objective-type questions.

The conducting body has announced that, Revise using standard engineering textbooks: For core sections like Engineering Mechanics, Thermal Science, Electrical Science, as well as Electronics, refer to standard diploma/degree-level engineering textbooks that match the topics listed in the authorized syllabus.

Track the 35% qualifying threshold: Since only applicants crossing the 35% cut-off are considered for interview calls (up to 3 times the number of posts), aim to build a comfortable margin above this threshold across all sections rather than just clearing it.

HPSC Assistant Director Syllabus 2026 - Important Links

The official notification states that, HPSC Assistant Director Syllabus PDF: Find details here

HPSC Government webpage: hpsc.gov.in